Disabling The Active Trac System; Turning Off Active Trac, Vsc And Trailer Sway Control - Lexus LX 570 2016 Service Manual

380
4-5. Using the driving support systems
When the VSC/Trailer Sway Control/Active TRAC/hill-start assist
control systems are operating
The slip indicator light flashes to indi-
cate that the VSC/Trailer Sway Con-
trol/Active TRAC/hill-start
control systems have been engaged.
The stop lights and high mounted stop-
light turn on when the hill-start assist
control system or Trailer Sway Control is
operating.

Disabling the Active TRAC system

If the vehicle gets stuck in fresh snow or mud, Active TRAC system reduce
power from the engine to the wheels. You may need to turn the system off to
enable you to rock the vehicle in order to free it.
Quickly push and release the button to
turn off Active TRAC.
The TRAC OFF indicator will come on.
Push the button again to turn the system
back on.

Turning off Active TRAC, VSC and Trailer Sway Control

■
Push and hold the button for more than 3 seconds while the vehicle is stopped to turn off
Active TRAC, VSC and Trailer Sway Control
The VSC OFF indicator light and TRAC OFF indicator will come on.
Push the button again to turn the system back on.
*
: On vehicles with pre-collision system, pre-collision brake assist and pre-collision brak-
ing will also be disabled. The PCS warning light will come on and the message will be
shown on the multi-information display. (P. 250)
Automatic reactivation of Active TRAC, VSC and Trailer Sway Control
■
Turning the engine switch off after turning off the Active TRAC and VSC systems will
automatically re-enable them.
LX570_OM_OM60N01U_(U)
assist
*