Multi-Terrain Monitor Cameras; Camera Positions; Using The Cameras - Lexus LX 570 2016 Service Manual

Multi-terrain Monitor cameras

■

Camera positions

●
The cameras of the Multi-terrain Monitor system are installed as follows.
Side camera (left and right
1
sides)
Front camera
2
Rear camera
3

Using the cameras

●
If dirt or foreign matter (such as water droplets, snow, mud, etc.) is adhering
to the camera, it cannot transmit a clear image. In this case, flush it with a
large quantity of water and wipe the camera lens with a soft and wet cloth.
NOTICE
How to use the cameras
■
Observe the following precautions. Failure to do so may prevent the Multi-terrain
●
Monitor from operating properly.
• Do not strike the camera area, or allow any objects to bump into it
If the camera or surrounding area has received a strong impact, the camera posi-
tion, installation angle, etc., may deviate. If the camera is accidentally subjected to
an impact, have the vehicle inspected at your Lexus dealer.
• Do not remove, disassemble or modify the camera or surrounding parts
Doing so may result in the camera malfunctioning. This also may result in a loss of
waterproof performance.
• If the camera lens is dirty, follow the above procedures to clean it
If the camera lens is damaged it cannot transmit a clear image.
Do not allow organic solvent, car wax, oil film remover, glass coating, etc. to con-
tact the camera cover
Doing so will negatively affect the camera cover (resin). If this happens, wipe it off
immediately.
• When the outside temperature is cold, do not cause any sudden changes in tem-
perature, such as by applying hot water
When washing the vehicle, do not apply water with a high-pressure washer to the
●
camera or surrounding area. Doing so may cause the camera to receive a strong
impact, and the camera may not operate properly
LX570_OM_OM60N01U_(U)
4-5. Using the driving support systems
355
4