460
6-1. Maintenance and care
NOTICE
To prevent paint deterioration and corrosion on the body and components (aluminum
■
wheels etc.)
Wash the vehicle immediately in the following cases:
●
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If you see dead insects, insect droppings or bird droppings on the paint
• After driving in an area contaminated with soot, oily smoke, mine dust, iron pow-
der or chemical substances
• If the vehicle becomes heavily soiled in dust or mud
• If liquids such as benzene and gasoline are spilled on the paint surface
If the paint is chipped or scratched, have it repaired immediately.
●
To prevent the wheels from corroding, remove any dirt and store in a place with low
●
humidity when storing wheels.
Cleaning the exterior lights
■
Wash carefully. Do not use organic substances or scrub with a hard brush.
●
This may damage the surfaces of the lights.
Do not apply wax on the surfaces of the lights.
●
Wax may cause damage to the lenses.
When using an automatic car wash
■
Set the wiper switch to the off position.
If the wiper switch is in "AUTO", the wipers may operate and the wiper blades may be
damaged.
When using a high pressure car wash
■
Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), con-
nectors or the following parts. The parts may be damaged if they come into contact
with high-pressure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
LX570_OM_OM60N01U_(U)