152
3-3. Adjusting the seats
Driving position memory
Your preferred driving position (the position of the driver' s seat, steering wheel
and outside rear view mirrors) can be entered into the computer' s memory and
recalled with the touch of a button. It is also possible to set this function to acti-
vate automatically when the doors are unlocked.
Three different driving positions can be recorded into memory.
Recording procedure
■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Adjust the driver' s seat, steering wheel, and outside rear view mirrors to the
3
desired positions.
While pressing the "SET" button,
4
or within 3 seconds after the
"SET" button is pressed, press
button "1", "2" or "3" until the
buzzer sounds.
If the selected button has already
been preset, the previously recorded
position will be overwritten.
Recall procedure
■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Press one of the buttons for the
3
driving position you want to recall
until the buzzer sounds.
LX570_OM_OM60N01U_(U)