224
4-3. Operating the lights and wipers
Automatic High Beam
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of vehicles ahead etc., and automatically
turns the high beam on or off as necessary.
WARNING
Limitations of the Automatic High Beam
■
Do not rely on the Automatic High Beam. Always drive safely, taking care to observe
your surroundings and turning the high beam on or off manually if necessary.
To prevent incorrect operation of the Automatic High Beam system
■
Do not overload the vehicle.
NOTICE
Notes when using the Automatic High Beam system
■
Vehicles without PCS (Pre-Collision System):
Observe the following to ensure that the Automatic High Beam functions correctly.
Do not touch the camera sensor.
●
Do not subject the inside rear view mirror or
●
the camera sensor to a strong impact.
Do not disassemble the camera sensor.
●
Do not spill liquid onto the inside rear view
●
mirror or the camera sensor.
Do not apply window tinting or stickers to the
●
camera sensor or the area of windshield near
the camera sensor.
Do not place items on the dashboard. There is a possibility that the camera sensor will
●
mistake items reflected in the windshield for streetlights, the headlights of other vehi-
cles, etc.
Do not install a parking tag or any other accessories near or around the inside rear
●
view mirror and the camera sensor.
Do not modify the vehicle.
●
Do not replace windshield with non-genuine windshield.
●
Contact your Lexus dealer.
Do not replace headlights with non-genuine headlights.
●
Contact your Lexus dealer.
Vehicles with PCS (Pre-Collision System): P. 246
LX570_OM_OM60N01U_(U)