Temporary Lowering Sensor Sensitivity - Lexus LX 570 2016 Service Manual

228
4-3. Operating the lights and wipers

Temporary lowering sensor sensitivity

■
The sensitivity of the sensor can be temporarily lowered.
Vehicles without PCS (Pre-Collision System):

To lower the sensitivity, push and hold
onds, and release. The indicator light on the inside rear view mirror will flash to indicate
that the sensitivity has been lowered.
When the engine switch is turned off, the sensitivity will be returned to its normal level.
Vehicles with PCS (Pre-Collision System):

Turn the engine switch off while the following conditions are met.
1
• The headlight switch is in
• The headlight switch lever is in low beam position.
Turn the engine switch to IGNITION ON mode.
2
Within 30 seconds after
3
beam position then pulling it to the low beam position quickly 10 times, then leave
the lever in high beam position.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
LX570_OM_OM60N01U_(U)
on the inside rear view mirror for 15 to 20 sec-
.
, repeat pushing the headlight switch lever to the high
2