Table of Contents
Advertisement
NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH VIA CAT5
VEEMUX INSTALLATION
1.
Connect an ST-C5VA-600 Local Unit to an audio/video source as described on pages 4-5.
2.
Connect a CAT5 cable (wired as specified on page 26) between the ST-C5VA-600 Local Unit and VEEMUX connector
"AV IN 1".
3.
Connect a CAT5 cable (wired as specified on page 26) between an ST-C5VA-600 Remote Unit and VEEMUX connector
"AV OUT 1".
Note: Shielded CAT 5,5e, or 6 cable must be used to connect to LOCAL and REMOTE units in order to meet CE emission
requirements.
4.
Connect a monitor and stereo speakers to the ST-C5VA-600 Remote Unit as described on page 6.
5.
Connect the powercord as shown in Fig. 6.
Figure 5- Attach ST-C5VA-600 Local Unit to VEEMUX
Figure 6- Attach ST-C5VA-600 Remote Unit to VEEMUX
8
Advertisement
Table of Contents
