Safety Instructions - Elation Event Brick W System Manual

2. SAFETY INSTRUCTIONS

1. In the event the main power cord to this fixture becomes damaged, it should only be
repaired or replaced by Elation Professional, an authorized Elation service center,
or a similar qualified technician to prevent electrical hazard.
2. Always be sure that the fan and the air inlets remain clean and are never blocked.
Allow about 6" (15cm) between this fixture and other devices or a wall to allow for
proper cooling.
3. Never touch the fixture during normal operation. This can cause severe personal
injuries and/or damage to the fixture.
4. Be sure to unplug the EVENT BRICK™ from the power outlet before performing any
service related issues.
5. Never look directly into the light source. You risk injury to your retina, which may
induce blindness.
6. For safe operation, follow the Installation guide described in chapter two of this
manual. Operating the EVENT BRICK™ without suited safety aids such as safety
cables or clamps can increase the risk of damage and/or personal injury.
7. Installation should only be performed by qualified and certified personnel.
8. When mounting this fixture, use only the original rigging parts included with this
fixture. Any structural modification will void the original manufactures warranty and
may increase the risk of damage and/or personal injury.
9. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.
10. Do not attempt to operate this fixture if the power cord has become damaged or
frayed.
©Elation Professional®
The Event MH™ is an extremely sophisticated piece of electronic
equipment. To guarantee a smooth operation, it is important to
follow the guidelines in this manual. The manufacturer of this
device will not accept responsibility for damages resulting from
the misuse of this fixture due to the disregard of the information
printed in this manual.
6
Event Brick System™
Event Brick System™