Elation Event Brick W System Manual page 15

Event Brick System™
Yoke Assembly – Multiple Unit Operation
You can connect up to four Event Bricks together in a bar assembly. To connect multiple
units together be sure to use the included mounting hardware and refer to the diagram
below.
Please note: To ensure maximum stability, no more than for units should be mounted
together in this fashion. Connecting more than four units will result in an unstable
assembly, which could collapse and damage the units.
Mounting
The Event Brick W System™ is fully operational in any mounting position, hanging
upside-down from a ceiling, or set on a flat level surface (see illustration on next page) etc.
Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent accidental
©Elation Professional® 15 Event Brick System™