Elation Event Brick W System Manual page 12

12. 5-Pin DMX Out Jack – This jack is used to send an incoming DMX signal to the next
fixture in the DMX chain via a female, 5-pin XLR jack.
13. 3-Pin DMX Out Jack – This jack is used to send an incoming DMX signal to the next
fixture in the DMX chain via a female, 3-pin XLR jack.
14. Wireless DMX Receiver Antenna – This antenna is used to receive a wireless DMX
signal form an Elation EW DMX Transmitter. When not in use this antenna is tuck
away inside the fixtures chassis. When using this fixture in a wireless system be sure
to extended the antenna for optimal use.
15. MODE/ESC BUTTON – This button is used to access and exit the fixture's on-board
menu system.
16. UP BUTTON – This button is used to scroll forward when navigating through the
fixture's menu system.
17. DOWN BUTTON – This button is used to scroll backwards when navigating through
the fixture's menu system.
18. ENTER BUTTON – This button is used to select and confirm a menu function.
19. 5-Pin DMX In Jack – This jack is used to receive an incoming DMX signal.
20. 3-Pin DMX In Jack – This jack accepts an incoming DMX signal via a male, 3-pin
XLR jack.
©Elation Professional® 12
Event Brick System™
Event Brick System™