Elation Event Brick W System Manual page 17

Event Brick System™
Clamp Mounting
The Event Brick™ provides a unique mounting bracket assembly that allows the unit to
stand on flat surface, hang on truss via a clamp, or be used in cluster allow multiple units to
rigged together (see the illustration below). Regardless of the mounting option you choose
please refer to the safety guidelines in this manual to avoid damage to the unit and/or injury
to persons.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an
added safety measure be sure to attach at least one properly rated safety cable to the fixture.
See illustration below.
©Elation Professional® 17 Event Brick System™