Troubleshooting - Error Codes - Matrix T1XE-01 Service Manual

8.2 TroUbleSHooTiNG - error CodeS

error Code
0x0140
0x0141
0x01A0
0x01A8
0x02A0
0x02AA
0x04A0
32
CHaPTer 8: TroUbleSHooTiNG
deSCriPTioN
Incline motor fail.
Motor over temperature.
Incline motor is disconnected.
Motor is over current.
Speed sensor disconnected or
failed
Motor over limited current.
No communication between the
console and the motor control
board.
ClaSS leVel
B 1. Reconnect the incline motor.
2. Check the incline motor connection to
the elevation rack.
3. Replace the incline motor.
B 1. Check the amp draw of the treadmill
with a load. Change the deck or running
belt if a high amp draw is present.
2. Adjust the tension of the running belt
if needed.
3. Make sure that the base frame fan is
running.
4. Replace the motor.
C 1. Reconnect the incline motor.
2. Check the incline motor connection to
the elevation rack.
3. Replace the incline motor.
C 1. Check the amp draw of the treadmill
with a load. Change the deck or running
belt if a high amp draw is present.
2. Adjust the tension of the running belt
if needed.
3. Make sure that the base frame fan is
running.
4. Replace the motor.
C 1. Reconnect the speed sensor to the
LCB.
2. Clean the speed sensor and optic
disc.
3. Replace the speed sensor.
4. Replace the LCB.
C 1. Reconnect the speed sensor to the
LCB.
2. Clean the speed sensor and optic
disc.
3. Replace the speed sensor.
4. Replace the LCB.
C 1. Check the console cable for pinches
or cuts. Replace if necessary.
2. Replace the console.
3. Replace the LCB.
SolUTioNS