Chart Data; Showing Dual Chart Types - Simrad GO XSE Operator's Manual

Chart data

The system is delivered with different embedded cartography
depending on region.
All units support Insight charts from Navico including Insight
Genesis. The system also supports charts from Navionics and
Jeppesen as well as content created by a variety of third party
mapping providers in the AT5 format. For a full selection of available
charts, visit gofreeshop.com, c-map.jeppesen.com, or
navionics.com.
Note:
Ú In this manual, all possible chart menu options are
described. These options vary depending on the chart you
are using.
Note:
Ú The system does not automatically switch to
embedded cartography if the chart card is removed. A low-
resolution chart will be displayed until you re-insert the
card or manually switch back to the embedded
cartography.

Showing dual chart types

If you have different chart types available - embedded or in the card
slot - you can show two different chart types simultaneously on a
page with two chart panels.
You can select a dual chart panel by pressing and holding the Chart
application button on the Home page, or by creating a favorite
page with two chart panels.
Charts | GO XSE Operator Manual
31