Maintenance - MasterCraft 54-8333-2 Owner's Manual

MAINTENANCE

GENERAL
!
WARNING:
only identical replacement parts. The
use of any other part may create a
hazard or cause damage to the product.
DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust,
oil, grease etc.
!
WARNING:
fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come
into contact with plastic parts. They
contain chemicals that can damage,
weaken or destroy plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool and the
workpiece.
!
WARNING:
modify tools or to create accessories.
Any such alteration or modification is
considered to be misuse and could
result in a hazardous condition leading
to possible serious injury. It will also
void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated
with a sufficient amount of high-grade
lubricant for the life of the unit under normal
conditions. Therefore, no further lubrication
is required.
When servicing, use
Never allow brake
DO NOT attempt to
19