Projector shuts down
Projector shuts down on its own.
This is a thermal problem. If a fan isn't running it causes a
power up problem because fans have a sensor line that
prevents the projector from properly starting up.
The problem is almost always a power supply or controller
ECA with a thermal breakdown problem.
Replace the power supply and run projector long enough to
know if that is the problem.
Replace the controller ECA.
LP630 Service Manual
(page 46)
Is the problem
solved?
No
(page 16)
Make sure the intake
filter is not clogged
with debris.
(page 10)
73