Table of Contents
Advertisement
MSR Module
The Magnetic Stripe Reader module supports tracks 1, 2, and 3, which cover all
possible reading methods currently in use.
Configuring MSR Settings
Use the MSR settings menu to configure the MSR module related settings.
1. On the Home screen, touch
MSR Settings.
2. Touch one of the following options:
•
Track setting: Configure tracks order, start
sentinels, and end sentinels settings.
By default, the start sentinel of a magnetic stripe
card is already set based on the ISO standard:
- Track 1: %
- Track 2: ;
- Track 3: +
•
Prefix and suffix setting: Configure the prefix
and suffix characters for package/track settings.
•
Output setting: Configure the output mode,
reader and buzzer settings.
•
Restore factory default settings: Return all MSR settings to the factory
default settings.
•
MSR Demo: Select to test the MSR module.
•
Firmware Version: The module firmware version will display on screen
within 10 seconds.
3. Touch
to return to the Home screen.
APPLICATION AND OPERATION: MSR Module
> Settings >
55
Advertisement
Table of Contents
