Mac-Filters Local - HP ProCurve MSM310 Reference Manual


PPPoE traffic (The PPPoe server must be the upstream device.)
 IP broadcast packets, except NetBIOS

Certain address management protocols (ARP, DHCP) regardless of their source address.
 Any traffic addressed to the AP, including 802.1X.
Blocked
 All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address. TTPS traffic not addressed to the AP (or upstream device) is also blocked, which
means wireless client stations cannot access the management tool on other HP products.
Default filters for outgoing wireless traffic
Applies to traffic sent from the AP to wireless client stations.
Accepted

Any IP traffic coming from the upstream device, except NetBIOS packets.
 PPPoE traffic from the upstream device.
 IP broadcast packets, except NetBIOS

ARP and DHCP Offer and ACK packets.
 Any traffic coming from the AP itself, including 802.1X.
Blocked

All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address.

mac-filters local

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac-filters local
Enables the MAC filter list.
no mac-filters local
Disables the MAC filter list.
mac-filters
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac-filters <address>
Adds an address to the MAC filter list.
no mac-filters <address>
Remove the specified address from the MAC filter list.
Parameters
MAC address. Specify 6 pairs of hexadecimal numbers separated by
<address>
colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01
CLI commands
Virtual AP context
2-65