Radius-Server Deadtime - HP ProCurve MSM310 Reference Manual

radius-server deadtime

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
radius-server deadtime <seconds>
Sets the retry interval for access and accounting requests that time-out.
If no reply is received within this interval, the AP switches between the primary and secondary
RADIUS servers (if defined). If a reply is received after the interval expires, it is ignored.
Parameters
Retry interval. Range: 2 - 60 seconds.
<seconds>
radius-server host
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
radius-server host <primary>[<secondary>]
Sets the addresses of the primary and secondary RADIUS servers.
Parameters
IP address of the primary RADIUS server.
<primary>
IP address of the secondary RADIUS server.
<secondary>
radius-server key 2
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
radius-server key <primary>[<secondary>]
Sets the primary and secondary secrets used to connect with the RADIUS server.
Parameters
Shared secret for the primary RADIUS server.
<primary>
Shared secret for the secondary RADIUS server.
<secondary>
radius-server message-authenticator
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
radius-server message-authenticator
Include the message authenticator attribute in RADIUS packets.
no radius-server message-authenticator
Do not include the message authenticator attribute in RADIUS packets.
radius-server name
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
radius-server name <name>
Changes the name of the RADIUS profile.
CLI commands
RADIUS profiles context
2-79