Vlan Interface Context - HP ProCurve MSM310 Reference Manual

CLI commands

VLAN interface context

VLAN interface context
Path: View > Enable > Config > Port 2 port interface > VLAN interface
Use this context to configure VLANs.
end
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end
Switches to parent context.
ip address
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address <ip address>/<mask>
Sets a static IP address for the VLAN.
Parameters
<address>
</mask>
ip address mode
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address mode (dhcp | static | none)
Sets the IP addressing mode for this VLAN interface.
Parameters
dhcp
static
none
2-72
View > Enable > Config > Port 1 port interface > VLAN interface
View > Enable > Config > Local mesh > VLAN interface
IP address.
Subnet mask in CIDR format. Specifies the number of bits in the mask.
Dynamic host configuration protocol. The DHCP server will automatically
assign an address to the AP, which functions as a DHCP client.
This option enables you to manually assign an IP address to the AP.
This VLAN does not have an IP address.