Typographical Conventions - HP ProCurve MSM310 Reference Manual

Typographical conventions

Command syntax
Command syntax is formatted in a monospaced font as follows:
Example
web admin kickout
ip http port <number>
end [force]
firewall mode
(high|low|none)
Management tool
When referring to the management tool interface, the Main menu name is presented first
followed by a right angle-bracket and then the sub-menu name, as in Network > Ports.
New in this release
New CLI commands in this release are identified by the text
in both the table of contents, alphabetical list of commands, and
HP ProCurve Networking support
The Customer Support/Warranty booklet included with your product and the HP ProCurve
Networking Web site, www.hp.com/go/procurve/support,
services offer by HP ProCurve Networking. Additionally, your HP-authorized network
reseller can provide you with assistance, both with services that they offer and with services
offered by HP.
Description
Items in plain text must be entered as shown.
Items in italics and enclosed in < > are parameters for
which you must supply a value. In this example, you
must supply a value for <number>.
Items enclosed in square brackets are optional. You
can either include them or not. Do not include the
brackets. In this example you can either include
"force" or omit it.
Items enclosed in parenthesis and separated by a
vertical line indicate a choice. Specify only one of the
items. In this example, you must specify 'high', 'low', or
'none'.
New
provide information on the support
Introduction
New in this release
in the left margin. This done
Chapter 2: CLI commands.
1-3