HP ProCurve MSM310 Reference Manual page 68

CLI commands
Config context
lldp dynamic-name refresh-time
New
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp dynamic-name refresh-time <time>
Sets the interval at which dynamic names for controlled APs are updated.
lldp dynamic-name user-string
New
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp dynamic-name user-string <name>
Specifies the text to use for the dynamic name.
You can use regular text in combination with placeholders to create the name. Placeholders are
automatically expanded each time the name is regenerated.
Placeholders
%RN
%RP
%SN
%IP
lldp fast-start-count
New
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp fast-start-count <count>
After an MED LLDPDU is received, this timer is started and the agent sends one MED LLDPDU to
the MED device each second as it counts down.
lldp holdtime-multiplier
New
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp holdtime-multiplier <hold>
Sets the hold time multiplier for LLDPDU transmissions.
The value of Multiplier is multiplied by the refresh-interval to define Time to live. Time to live
indicates the length of time that neighbors will consider LLDP information sent by this agent to be
valid.
lldp med-location civic-address-element
New
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
lldp med-location civic-address-element <caelement>
Adds a Civic Address Element.
2-38
System name of the neighboring device to which the port is connected,
obtained via the System Name TLV. Since this is an optional TLV, if it is not
available, the Chassis ID TLV is used instead.
Port description of the port on the neighboring device to which the local
port is connected, obtained via the Port Description TLV. Since this is an
optional TLV, if it is not available, the Port ID TLV is used instead.
Controller's serial number.
Controller's IP address. An IP address can require up to 15 characters
(nnn.nnn.nnn.nnn).