Ip Qos Context - HP ProCurve MSM310 Reference Manual

IP QOS context

Path: View > Enable > Config > IP QOS
Use this context to configure IP QoS profiles.
end
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end
Returns to a previous context.
end-port
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
end-port <number>
Specifies the end port to use for this IP QoS profile.
Parameters
End port number. Range: 0 - 65535
<number>
priority
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
priority <low | medium | high | very-high>
Sets the priority for this IP QoS profile.
Parameters
Available priorities are: low, medium, high and very-high.
<priority>
profile name
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
profile name <name>
Changes the name of the IP QoS profile.
protocol
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
protocol <number>
Specifies the protocol ID to use for this IP QoS profile.
Parameters
Protocol number. Range: 0 - 255.
<number>
start-port
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
start-port <number>
Specifies the start port to use for this IP QoS profile.
CLI commands
IP QOS context
2-81