Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Wireless Access Point
  5. MSM335
  6. Quick start manual

HP MSM335 Quick Start Manual

Hide thumbs Also See for MSM335:

Advertisement

Quick Links

Download this manual See also: Reference Manual
The MSM335 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED product. The
Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
This Quickstart shows you how to get started using the MSM335 Access Point (US J9356A/B, WW J9357A/B).
After reading this Quickstart, you can visit www.hp.com/go/procurve/manuals and download documents of particular interest such as the MSM3xx / MSM4xx
Access Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide. For information on the Integrated
Sensor, see the RF Manager documentation.

Hardware overview

MSM335 Access Point Quickstart
In

Advertisement

loading

Related Manuals for HP MSM335

Summary of Contents for HP MSM335

  • Page 1: Hardware Overview

    This Quickstart shows you how to get started using the MSM335 Access Point (US J9356A/B, WW J9357A/B). After reading this Quickstart, you can visit www.hp.com/go/procurve/manuals and download documents of particular interest such as the MSM3xx / MSM4xx Access Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide. For information on the Integrated Sensor, see the RF Manager documentation.

  • Page 2: Package Contents

    Package contents all configuration settings. Discovery of the controller is automatic if default settings are used on the MSM335 and the controller, and both devices are on the same subnet. See MSM335, documentation, mounting bracket, 4 mounting screws with wall anchors, Working with controlled APs in the MSM7xx Controllers Management and Configuration retention screw (4-40x1/4”).

  • Page 3: Installation

    PROFESSIONAL INSTALLATION REQUIRED. For indoor installation only. Warning: • The MSM335 is powered-on when the Ethernet port is plugged into a PoE power source Prior to installing or using the MSM335, consult with a professional installer trained in or when an external power supply is connected.

  • Page 4: Initial Configuration (Autonomous Mode)

    • If using a PoE injector, use Ethernet cables to connect your computer to the data in port of the PoE injector and the MSM335 to the data and power out port of the PoE • A 10/100 or 10/100/1000 PoE-enabled switch. Various PoE-enabled switches are injector.

  • Page 5: Test The Wireless Network

    Initially, the MSM335 power light will blink once every two seconds. Wait approximately By default the MSM335 operates as a DHCP client. This means that if the network has a a minute until it begins blinking once per second before proceeding to the next step.

  • Page 6: Performing Additional Configuration

    IP address automatically. • On all radios of a rev A MSM335, the 5 GHz DFS channels are enabled and can be used. • On all radios of a rev B MSM335, the following additional 5 GHz DFS channels are disabled and For example, to do this in Windows Vista, use Control Panel >...