Wan Ip Interface Context - HP ProCurve MSM310 Reference Manual

WAN IP interface context

Path: View > Enable > Config > WAN IP interface
Use this context to configure various IP-networking related settings on the Internet port.
pppoe client user
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
pppoe client user <username> <password>
Sets the PPPoE username and password.
no pppoe client user
Deletes the PPPoE username.
Parameters
The username assigned to you by your ISP. The AP will use this username
<username>
to log on to your ISP when establishing a PPPoE connection.
The password assigned to you by your ISP. The AP will use this username
<password>
to log on to your ISP when establishing a PPPoE connection.
ip address mode
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address mode (dhcp | pppoe | static)
Sets the IP addressing mode for Port 2.
Parameters
Dynamic host configuration protocol. The DHCP server will automatically
dhcp
assign an address to the AP, which functions as a DHCP client.
Point-to-point protocol over Ethernet. The PPPoE server will automatically
pppoe
assign an IP address to the AP. You need to supply a username and
password so the AP can log on.
This option enables you to manually assign an IP address to the AP.
static
ip address
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address <ip address>/<mask>
Sets a static IP address for the port.
Parameters
IP address.
<address>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
</mask>
ip default-gateway
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip default-gateway <ip address>
Sets the IP address of the default gateway.
CLI commands
WAN IP interface context
2-51