Enable Context - HP ProCurve MSM310 Reference Manual

CLI commands

Enable context

Enable context
Path: View > Enable
This context provides access to various utilities.
reboot device
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
reboot device
Restarts the system.
show certificate
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show certificate
Displays current certificates.
show certificate binding
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
show certificate binding
Displays how the certificates are used.
iperf
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
iperf -c host [-t time]
Runs a performance throughput test.
Parameters
<-c host>
<-t length>
ping
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ping <host> [-c <count>] [-s <length>] [-q]
Determines if the specified remote IP address is active.
Parameters
<-c host>
<-c count>
<-s length>
<-q>
2-4
The IP address or DNS name of the iperf server to connect to.
Length of the throughput test in seconds.
The IP address or DNS name of the host to ping.
Number of pings.
Length of the ping datagram.
Quiet mode. No output.