Table of Contents
Advertisement
Trunk Setting
The Trunk function enables to cascade two or more devices with a larger bandwidths.
There are four Trunking groups to be set; and there are default ports in each member. Checked "Enable" to
use the trunk function, select the ports in each member to be trunk, and click "Apply" to activate the selected
trunk group.
Figure 23. Trunk Settings
Be sure that the selected trunk setting port must connect to the device with a same VLAN group.
28
NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
YML842 Rev1
Advertisement
Table of Contents
