Table of Contents
Advertisement
IDENTIFYING EXTERNAL COMPONENTS
This section identifies all the major external components of the switch.
Front Panel
The figure below shows the front panels of the switch.
24-port 10/100Mbps Fast Ethernet ProSwitch
LED Indicator Panel
Refer to the next chapter for detailed information about each of the switch's LED indicators.
Power (PWR)
This indicator lights green when the switch is receiving power, otherwise, it is off.
Link / Activity ( green )
This indicator light green when the port is connected to a Fast Ethernet or Ethernet station,
if the indicator blinking green will be transmission or received data .
100Mbps ( green )
This LED indicator light green when the port is connected to a 100Mbps Fast Ethernet
station. Otherwise, the LED is off when the port is connected to 10Mbps Ethernet station.
Twisted-Pair Ports
These ports supports automatic MDI/MDIX crossover detection function gives true 'plug and
play' capability without the need of confusing crossover cables or crossover ports.
With the Auto-MDI function, you just need to plug-in the network cable to the hub directly and
no need to care if the end node is NIC (Network Interface Card) or switches and hubs.
Rear Panel
The rear panel of the ProSwitch has an AC Power Connector socket.
www.netcomm.com.au
Page 8
24-port 10/100Mbps Auto-negotiation Fast Ethernet ProSwitch
Rev.1 - YML624
Advertisement
Table of Contents
