Table of Contents
Advertisement
Gateway behind a NAT/Firewall Network
The VoIP gateway uses a private IP address and the Internet sharing function of other systems to connect
to the Internet.
The following diagram shows a typical network connection in which broadband devices such as an
ADSL router work in router (NAT) mode so that the gateway is behind a NAT/Firewall. In this case, the
broadband router (NAT/Firewall) and the gateway need to be configured correctly in order to allow the
gateway to communicate with the Internet and VoIP network properly, using different techniques to
traverse the NAT/Firewall.
Note:
The above diagram shows a 4-port SmartVoice gateway for illustration purposes.
An 8, 16 or 32 port SmartVoice gateway could also be used depending upon your
network requirements.
SmartVoice Gateway(s) User Guide
YML832 Rev1
13
Advertisement
Table of Contents
