Table of Contents
Advertisement
Example of SmartVoice Gateway using a combination of FXS and FXO ports
Phone1-Phone2 are FXS interfaces and can be directly connected to telephone sets for direct calls.
Line1-Line2 are FXO interfaces and can be connected to PSTN lines to serve as a bridge between the
PSTN and other VoIP telephones. The system also allows a call to be made from a traditional telephone
line to connect with a user behind the SmartVoice Gateway.
Integrating the SmartVoice Gateway with PBX
Phone1-Phone2 are FXS interfaces and can be connected to PBX CO lines; Line1-Line2 are FXO
interfaces and can be connected to a PSTN to act as a bridge between the PSTN and other VoIP
telephones. The system also allows a call to be made from a traditional telephone line to connect with a
user behind the SmartVoice Gateway.
Note:
The above diagrams show a 4-port SmartVoice gateway for illustration purposes.
An 8, 16 or 32 port SmartVoice gateway could also be used depending upon your
network requirements.
18
SmartVoice Gateway(s) User Guide
YML832 Rev1
Advertisement
Table of Contents
