Advanced Options - NetComm SmartVoice Gateway Reference Manual

Advanced Options

NOTE: There are two levels to enter Web. Administrator is able to change all
settings. Web UI only changes some settings.
• Administrator's name and Password: Enter administrator name and password, which has the
highest level of control of the gateway.
• Web UI Login ID and Web UI/IVR Password: Enter login ID and password when you log into the
Web interface/IVR of the gateway as a normal user.
• Web UI auto log out: If a user does not act within the effective time range when logging into the
web interface, the user will be disconnected from the web page to allow others to login.
• Dial Wait Timeout: Use it to set the waiting time for the user's first key pressing when dialing a
number. The user will hear a busy tone if he/she does not press the first key within the set time
frame.
• Inter Digits Timeout: Set the waiting time between each key pressing. The entered numbers will
be dialed after the timeout.
• Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between
tones): Used to set dial tone when a call is being diverted to another extension.
• DTMF Detection Sensitivity: Used to adjust the sensitivity of the telephone keys.
• Enable Out-of-Band DTMF: To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via SIP
Info.
NOTE: Out-of-Band DTMF transport method may vary with different VoIP networks,
please contact your VoIP provider for their preferred method.
NOTE: The 800 series gateway has three extra options compared to the 400
series gateway: FXO Dial Type, FXO Impendance and FX Impedance. Use the
default settings for these options as they have been configured for the Australian
telephone network.
SmartVoice Gateway(s) User Guide
YML832 Rev1
37