Functions Only For The Administrator - Riso 9150 Administrator's Manual

■ Functions only for the administrator

There are some functions that can only be used by the administrator when using this machine.
These functions can be controlled by logging in as an administrator as follows.
1 Log in as a user with administrator authority.
Press [Admin mode] on the mode screen.
2
3 Press a mode button.
The following are the functions that can be used only by the administrator in each mode.
Mode screen
Status
Printer mode
Job list
Copy mode
Direct Access entry
Selections entry
Copy mode and Scanner mode
Register as default value
Check setting
Save/Call setting
8
Function Operation that can only be performed by the administrator
[System] screen
Entry into the [Comment] field.
Jobs on the [Active] screen, [Waiting] screen, and [Finished] screen
Confirm, clear, and print jobs for all users.
Jobs on the [Folder] screen
Confirm, clear, and print personal folder jobs for all users.
Jobs with a PIN code
Clear jobs without having to enter a PIN code.
Change entry when login is not necessary to access each mode.
See "Direct Access/Selections entry" in the "User's Guide".
When login is not necessary to access each mode
Change the default in copy and scanner modes.
(by pressing [Save as default] or [Initialize])
When login is necessary to access each mode
Change the default in copy and scanner modes if users have not saved their own
default, or if they have saved their own default and then press [Initialize].
For information on how to set the default, see "Check setting" in the "User's
Guide".
Entry of settings shared by all users when login is not necessary to access each
mode.
See "Save/Call setting" in the "User's Guide".
Clear and rename shared setting entry (shared mark
See "Save/Call setting" in the "User's Guide".
on button).
ComColor Series Administrator's Guide 06