Riso 9150 Administrator's Manual page 36

6 Press [OK].
When this function is enabled, the [Confirm]
screen is displayed on the control panel one
minute before the end time.
Press [Suspend] if you do not want to turn the
power off.
● If you do not press [Suspend] within one
minute after the screen is displayed, the end
process starts.
● If you press [Suspend], you can close the
[Confirm] screen temporarily to suspend the
end process. One minute later, the [Confirm]
screen will be displayed again.
● In any of the following cases, the sub power
does not turn off.
- When a paper jam, service call, unit error,
set-related error, or warning error has
occurred
- When the machine is in use at the set time
● You can configure this function in the RISO
Console. (See p. 11)
34
ComColor Series Administrator's Guide 06