Setting Items - Riso 9150 Administrator's Manual

■ Setting Items

The items you set in [Authentication servers] are as follows.
Server settings
Specify (primary/secondary) server's settings for LDAP server and Kerberos
server and port numbers.
IC card authentication
Up to five attributes can be set for IC card's attributes.
Enable or disable the attribute which is set for IC card.
Access time-out
Specify the time-out period for accessing the authentication server.
Access retry times
Specify the retry times for accessing the authentication server when the access
fails.
Cache information
Specify whether to enable (ON) or disable (OFF) cache information. If you set it to
[ON], you can reset cache information.
Case sensitivity at auth
Set whether to distinguish the user ID by case sensitivity at authentication.
Login-to setting
Set whether to display the [Login selection] screen when you log in to a domain using
the authentication server settings. Up to three domains are displayed.
● When the [Login selection] is set to [No display], authentication is
performed according to the priority specified in [Authentication
servers].
● When the DNS server (IPv4)/(IPv6) is set to [Not Use] in [Network
setting (Details)], the domain setting is unavailable.
● When the server settings for Kerberos server are left blank, "IP addresses
of LDAP servers" are displayed on the [Login selection] screen.
Attribute of user ID
Specify the attribute of user ID for accessing the authentication server.
* 1 Login name for access to the authentication server.
* 2 Password for access to the authentication server.
* 3 DN (Distinguished Name) that is the search root for user on the authentication server.
* 4 Search range for access to the authentication server.
* 5 Displayed on the [Login selection] screen when you log in to the authentication server.
30
Setting/Description Set value/Details
LDAP server
(Primary/Secondary)
• Server name: Up to 256 alphanumeric
characters, IP address
• Port
1
• Search login name*
2
• Search password*
3
• Search root*
4
• Scope of search*
Kerberos server
(Primary/Secondary)
• Realm: Up to 64 alphanumeric characters (only
uppercase characters)
5
• Login-to name* : Up to 10 characters
• Server name: Up to 256 alphanumeric
characters, IP address
• Port
• The attribute used for attestation of an IC card
OFF, ON
OFF, ON
5-120 sec.
(Factory setting: 5 sec.)
0-5 times
(Factory setting: 0 times)
OFF, ON
Yes, No
No display, Displayed
Up to 32 alphanumeric characters
ComColor Series Administrator's Guide 06