Basic Operation; Power Sources; Side Handle - Red Epic EPIC-M BUILD V3.3 Operation Manual

BASIC OPERATION

This section describes basic operation, starting from power up, Viewfinder layout and Menu navigation.
WARNING: THE SIDE HANDLE, SIDE SSD MODULE, REAR MODULES AND LENS MOUNT ARE NOT
HOT SWAPPABLE – MEANING YOU CANNOT REMOVE OR INSTALL THEM WHILE THE CAMERA IS
POWERED ON. BEFORE INSTALLING OR REMOVING ANY OF THESE ACCESSORIES, YOU MUST
POWER DOWN THE CAMERA. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE
ACCESSORY AND / OR CAMERA BRAIN THAT WILL NOT BE COVERED UNDER WARRANTY.
Power draw is prioritized as follows when multiple power sources are available to the camera.
1. DC (Voltage) or Brick (%)
2. Battery Module batteries
3. Side Handle battery

POWER SOURCES

SIDE HANDLE

The optional Side Handle accepts one REDVOLT.
40 40 40 40
Side Handle Battery Compartment
COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B