Table of Contents
Advertisement
MODULE INSTALLATION / REMOVAL
To install a DSCM Module to the camera, an Adaptor Plate must be purchased separately. The following
procedure details installation of the Adaptor Plate and DSMC Module.
Install the Adapter Plate
5. Power down the camera.
6. Remove the REDMOTE.
7. Place the adapter plate over the v-mount on the rear of the camera brain.
8. Using a T-20 Torx, lightly tighten the four screws. Do not over tighten.
32
32
32
32
COPYRIGHT © 2012 RED.com, Inc.
955-0002_v3.3, Rev- B
Advertisement
Table of Contents
