Channel Modes; Balanced Microphone; Unbalanced Microphone; Balanced Microphone With 48V Phantom Power - Red Epic EPIC-M BUILD V3.3 Operation Manual

CHANNEL MODES

The analog sources can be set to different modes to match the incoming audio signals. On the Camera
Inputs the following modes are available:

BALANCED MICROPHONE

Balanced microphone input. Usually used with microphones that provide XLR connectors and have an
internal battery.

UNBALANCED MICROPHONE

Unbalanced microphone input with 3.3V bias. This type of input is usually provided by unpowered
microphones with 3.5 mm TRS plug.

BALANCED MICROPHONE WITH 48V PHANTOM POWER

Used with balanced XLR-connected microphones that accept 48V phantom power.
Note: Phantom Power is not available on non-upgraded Epic-M's and early Epic-X. If your camera
does not allow you to select phantom Power please contact your Bomb Squad representative for
upgrade information.
On the PRO I/O the following additional modes are available:

LINE IN 0 DBU

Fixed input gain with if limiter is enabled.

LINE IN 0 VU

Same gain as 0dBu but different compression/limiter settings if enabled.
(If no limiter is enabled Line In 0dBu and Line In 0 VU behave the same.)
180 180 180 180
COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B