Adjust Project Settings - Red Epic EPIC-M BUILD V3.3 Operation Manual

ADJUST PROJECT SETTINGS

TIME BASE
The project TIME BASE defines the rate at which the footage will be played back. When changing the
project frame-rate, the sensor frame-rate will default to the project rate, but may be over-ridden using the
sensor frame-rate controls.
Multiple projects with differing time bases may be stored on a media cartridge (SSD.)
To adjust the project TIME BASE, press the MENU button on the Side Handle or REDMOTE. Then use the
Scroll Wheel or Direction Keys to navigate to SETTINGS > PROJECT > TIME BASE and press ENTER.
Adjust to the desired value using the Scroll Wheel and press ENTER once more to confirm.
If using a Touch Screen, select SECONDARY MENUS > SETTINGS > PROJECT > TIME BASE. Adjust by
sliding your finger up / down or tapping on the desired value, and then press anywhere else on the touch
screen to confirm.
The following TIME BASES are currently available:
• 23.98 fps
• 24.00 fps
955-0002_v3.3, Rev-B
• 25.00 fps
• 29.97 fps
COPYRIGHT © 2012 RED.cm, Inc.
• 47.96 fps
• 48.00 fps
• 50.00 fps
• 59.94 fps
65 65