Lights And Visibility - Seat 2005 Toledo Owner's Manual

Lights and visibility

Lights
Switching lights on and off
Switching on the side lights
– Turn the light switch
Switching on dipped headlights
– Turn the light switch to position
Switching off the lights
– Turn the light switch to position 0.
Safety First

Fig. 73 Detailed view of
dash panel lights, fog
light and rear fog light
control
⇒ fig. 73

to position .

.
Operating instructions
Switching on the fog lights*
– Pull the switch out of position

symbol in the light switch lights up.
Switching on the rear fog lights (vehicles with front fog lights)
– Pull the switch out of position
⇒
. A warning lamp lights up in the control panel.
Switching on the rear fog lights (vehicles with no front fog lights)
– Pull the switch out of position
lights up in the instrument panel.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are
not bright enough to illuminate the road ahead and to ensure that other
road users are able to see you. Always use your dipped headlights if it is
dark or if visibility is poor.
Note
•
The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
•
If the lights are left on after the key has been taken out of the ignition lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
Tips and Maintenance
Lights and visibility
 
or to the first stop. The
 
or to the second stop

to the last stop. A warning lamp
Technical Data
111