Starting And Stopping The Engine - Seat 2005 Toledo Owner's Manual

Hide thumbs Also See for 2005 Toledo:
Table of Contents

Advertisement

A
Starting
2
The engine is started when the key is in this position. Electrical components
with a high power consumption are switched off temporarily.
Each time that the vehicle must be started, the ignition key must be turned to
A
the position
. The repetitive start prevention lock of the ignition prevents
0
possible damage to the starter motor if the engine is already running.
WARNING
Wait for the vehicle to come to a standstill before removing the ignition
key from the lock. The steering lock could be activated immediately - Risk
of accident!
Always remove the key from the ignition lock when leaving the vehicle,
even if you only intend to be gone for a short period. This is especially
important if you must leave children or disabled people in the vehicle, they
could accidentally start the engine or work electrical equipment such as
the windows possibly resulting in an accident.
Unsupervised use of the keys could result in the engine being started
or electrical systems, such as the electric windows, being used. This can
result in serious injury.
Caution
The starter motor will only work when the engine is stopped (ignition key
A
position
).
2
Safety First
Operating instructions
Electronic immobiliser
The immobiliser prevents unauthorised persons from driving
the vehicle.
Inside the key there is a chip that deactivates the electronic immobiliser auto-
matically when the key is inserted into the ignition.
The immobiliser will be activated again automatically as soon as you pull the
key out of the ignition lock.
The engine can only be started using a genuine SEAT key with the correct
code.
Note
The vehicle cannot be operated properly if you do not have a genuine SEAT
key.

Starting and stopping the engine

Starting petrol engines
The engine can only be started using a genuine SEAT key with
the correct code.
– Move the gear lever to the neutral position and depress the
clutch pedal fully and hold it in this position, the starter will then
only have to turn the engine.
– Turn the ignition key to position ⇒ page 162 to start the engine.
Tips and Maintenance
Driving
Technical Data
163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents