Seat 2005 Toledo Owner's Manual page 263

Reverse light / rear fog light
– Insert the star-headed screwdriver in the opening on the lower
section of the rear light and unscrew the screw in the direction of
⇒ fig.
the arrow 194.
Safety First
Fig. 194 Rear light fitted
on bumper and viewed
from below
Fig. 195 Rear light after
removal from bumper
Operating instructions
– Remove the rear light from its casing taking care not to pull on
the cable.
– Rotate the lamp holder to the left, and remove it in the direction
⇒ fig.
of the arrow 195.
– Replace the bulb by pressing on it and rotating at the same time
to the left.
– Installation is done in the reverse order.
Side indicators
– Press the indicator to the left or to the right to remove the lamp.
– Remove the lamp holder from the indicator.
– Remove the failed glass bulb and replace with a new bulb.
Tips and Maintenance
If and when
Fig. 196 Side indicator
Technical Data
261