Seat 2005 Toledo Owner's Manual page 262

260 If and when
Turn indicators
– Remove the rear light from its casing (see side/brake light).
– Unscrew the bolts
on this.
– Pull out the lamp holder from the turn signal using a screw driver
in the direction of the arrow (see
– Fit the replacement lamp by pressing it down and rotating to the
left.
– Installation is done in the reverse order.
Fig. 192 Indicator lights
Fig. 193 Indicator lights
⇒ fig. 192 A
from the lamp holder and pull
C
⇒ fig.
193).