Seat 2005 Toledo Owner's Manual page 142

140 Seats and stowage
Opening and closing the armrest*/ drink holder*
– To open, pull the loop in the direction of the arrow
A
fig. 109 .
1
– To close, lift the Drink holder*/ armrest* in the direction of the
⇒ page 139, fig. 110
arrow
WARNING
Ensure that the load in the luggage compartment is correctly secured with
the retainer net when travelling with the armrest down ⇒ page 138.
Multi-purpose* mobile stowage compartment - Fitting and
removal
This stowage compartment may only be placed in the central
area of the rear seat
⇒ page 139,
A
.
2
Fig. 111 Mobile stowage
compartment Installation
Fitting mobile stowage compartment
– Fold down the small section of the rear seat back rest, in order to
access the large section of the back rest.
– Fit the mobile stowage compartment mounting plate
⇒ fig. 112
from the inside of the vehicle, through the rear
section of the seat. It should be fitted between the back rest and
the seat, in the central seat area.
– Push the plate until it clips the cushion frame. The rings of the
mobile stowage compartment mounting plate appear at the front
of the seat.
– If it is difficult to make the plate clip, tilt the rear back rest of the
large section forwards slightly and then lean the back rest back-
wards to make the fitting of the mobile stowage compartment
onto the mounting plate easier.
Fig. 112 Mobile stowage
compartment mounting
plate
A
H