Seat 2005 Toledo Owner's Manual page 62

60 Cockpit
Displayed categories
The display in the instrument panel shows the mileage and
trip recorder as well as the selector lever position.
A
Warning and monitoring indicators: "Warning and indication lamps"
1
A
Clock: "Setting the time". In some vehicles the ambient temperature is
1
displayed to the right of the clock.
A
There are optional and automatic displays in this field.
2
- Optional indicators: e.g. Multi-function display (MFD) and ambient
temperature display
- Automatic indicators: Information texts and warnings: "Warning and
information messages on the screen"
- Menus providing further information and which can be used to make
diverse settings are also shown: "Instrument panel menus"
A
Distance display or flexible service interval display: "Distance display or
3
flexible service interval display"
A
Selector lever position display for the automatic gearbox. The actual
4
position of the selector lever or the gear which is engaged (for Tiptronic)
are highlighted.
Mileage display or Service Interval Display
Distance display
The left-hand counter in the display registers the total amount of distance
covered by the vehicle.
The right-hand counter registers the short journeys. The last digit indicates
steps of 100 metres. The trip recorder counter may be reset by the reset
button
Fig. 38 Digital display in
Service interval display
the instrument panel
A Service pre-warning will appear in the mileage displays if a service is due
soon. A "spanner" symbol appears and the display "km" with the distance
that can be driven until the next service appointment is due. The display will
change after approximately 10 seconds. A "clock symbol" appears and the
number of days until the service appointment should be carried out. The
instrument panel displays shows the following message
... DAYS. The service message will disappear approximately 20 seconds after
the ignition is switched on or the engine is running. The normal display can
be resumed by pressing the reset button on the trip counter or by pressing the
rocker switch of the MFI
With the ignition switched on, you can call up the current service message by
pressing the trip counter reset knob for 2 seconds.
5)
Depending on the model version
⇒ page 56, fig. 33 A
.
5
⇒ page 61, fig. 39
5)
: SERV. IN ... KM OR
A
.
B