Seat 2005 Toledo Owner's Manual page 271

Fitting the towing eye
– Take the towing ring from the onboard tools.
– Pull the lower front cover down and leave the cover hanging on
the vehicle.
– Remove the cover of the screw hole, insert a screwdriver into the
lower slot and lever gently.
– Screw the towing eye as shown by arrow anti-clockwise to the
limit position in the front
⇒ page 268, fig. 205
Safety First
⇒ page 268, fig. 204
or rear
threaded hole.
Operating instructions Tips and Maintenance
If and when
Technical Data
269