Pro-Form crosswalk 395 User Manual page 6

PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assemb]y. The number in parentheses betcw each draw-
ing is the key number of the part, from the PART LIST near the end of this manual, The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-
tached, tf it is not, ca[J 1-888-533-1333, Extra hardware may be included.
I/4" Star Washer
(23)--4 3/8" Star #8 x 1i2" Ground #8 x 3/4" Screw
Washer (3)-t0 Screw (I)-1 (4)-4
#8 x !" Screw 1/4" x 3 1/2" Screw (56)--4
(7)-4
#10 × 1 _12"Screw
(8)-2
3/8" × 3 1/4" Screw (2)-6
D