Pro-Form crosswalk 395 User Manual page 10

Position 1he Console Crossbar (61) between
the Left and Right Handrails (59, 64) with
the Console Ground Wire (47) positioned as
shown.
Attach the Console Crossbar {61) to the Left
and Right Handrails (59, 64) with the other four
5/15" x 314" Screws (5) and the other four 5/t6"
Star Washers (6) that you removed in step 6,
Start all four Screws, and then tighten them.
47_
61
64
B. With the help of a second person, hoJd the con-
sole assembly near the Right HandraiI (64).
Connect the Upright Wire (63) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place, tf they do not, turn one connector and try
again, IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER, Then. remove the Wire tie from
the Upright Wire.
Connect the Console Ground Wire (47) on the
Console Crossbar (61) to the ground wire on the
console.
[
Console I
Wire ._
lO