Pro-Form crosswalk 395 User Manual page 11

Insert the wires into the Right Handrail (64)
throughthe indicated hole as you set the con-
sole assembly on the Left and Right Handrails
(59, 64). Make sure that no wires are pinched.
Attach the console assembly with four #8 x 314"
Screws (4}. Start all four Screws, and then
tighten them, Do not overtighten the Screws.
See assembly step 5. Firmly tighten the six 3/8"
× 3 1/4" Screws (2] on the lower ends ol the Left
and Right Uprights (66, 76) (only one side is
shown).
10. Attach the two Console Clamps (83) to the con-
sole assembly with four #8 x 1" Screws (7),
Console Assembly
Ground
Wires
i
10 Console
Assembly
1t