Chapter 9 Capture Parameters Configuration; Set License Plate Parameters; Set Flash Light Parameters - HIKVISION iDS-2CD9396-BIS User Manual
Network traffic camera (for checkpoint and intersection violation system)
Hide thumbs
Also See for iDS-2CD9396-BIS:
- Operation manual (70 pages) ,
- Configuration manual (84 pages) ,
- Operation manual (69 pages)
Table of Contents
Advertisement
Chapter 9 Capture Parameters Configuration
Purpose:
You can set capture parameters before capturing, and edit capture parameters when the default
capture parameters cannot meet actual needs.
Set License Plate Parameters
Go to Configuration > Device Configuration > Capture Parameters > License Parameters.
Select License Plate Recognition as Front Plate or Back Plate. You should select Front
Plate when you want to capture license plate number in vehicle head direction, and
select Back Plate when you want to capture license plate number in vehicle tail direction.
Set Flash Light Parameters
Go to Configuration > Device Configuration > Capture Parameters > Flash Light
Parameters.
Select a tab corresponded with the flash light control port.
Network Traffic Camera • User Manual
License Parameters Configuration
47
Advertisement
Table of Contents
