When Having Some Trouble; Power Indicator - Epson EMP-730 User Manual

When Having Some Trouble

If you are having a problem with the projector, first check the projector's
indicators.
The projector is provided with the following two indicators. These indicators
alert you to problems with projector operation.
The following tables show what the indicators mean and how to remedy
problems that they indicate.

Power Indicator

Indicator status
orange
orange
green
green

Power indicator

Warning indicator
Cause
Standby status (Not abnormal)
The power cord should only be disconnected
when the projector is in this condition.
Press the [Power] button to start projection.
Cool-down in (Not abnormal)
progress
• Please wait.
The cool-down
seconds.
• You cannot operate the [Power] button during
cool-down. Press the button again after cool-
down ends.
Projection in (Not abnormal)
progress
Warm-up in (Not abnormal)
progress
Please wait.
Warm-up time is approximately 40 seconds.
After warm-up is complete, the flashing green
indicator changes to steady green.
: lit
Remedy or Status
period lasts about 30 - 45
: flashing
See Page
28
31
29
29
61