If The Monitor Port Is A 13W3 Port - Epson EMP-730 User Manual

If the Monitor Port is a 13w3 Port

Some workstation-type computers have a 13w3 monitor port.
Use a commercially-available 13w3 ⇔ D-Sub 15-pin cable to connect the
Computer/ Component Video port at the rear of the projector to the monitor
port of the computer.
To monitor port
Tip :
• Change the "Input Signal" setting in the "Video" menu to "RGB" after making the
connections. (p.49)
• If more than one external component is connected to the projector, use the [Source]
button on the projector's control panel or the [Computer] button on the remote control
to select the Computer port as the input source. (p.30)
• Do not bind the power cord and the computer cable together, otherwise image
interference or errors in operation may result.
• Some workstations may require a special cable. Consult the workstation manufacturer
for further details.
13w3 cable
(commercially-available)
To Computer/
Component Video port
19